Go Home

Products Ordering Shipping Info. Contact Info Home

Pinball Clock Parts:

Circuit Board Circuit Board

Completely assembled and tested printed circuit assembly.

PBC20   $269.00
    
Transformer Transformer

New 24V and 48V AC transformer for powering reels and chimes.

XF004   $60.00
    
Transformer Line Cord

New 18/3, 6 foot line cord.

LC001   $4.50
    
Line Filter Line Filter

Use on the input circuit if external noise from electronic devices or neon lights cause the circuit board to reset.

LF001   $18.00
    
Filter Capacitor Transformer

Filter capacitor. 2.2 uF, 250V.
Use on coils and relays if voltage spikes cause the circuit board to reset.

CF225/250   $10.00
    
Lamp Lamps

Bayonet style lamps for general illumination.

No. 47, 6.3V, .15A, Box of 10.

LM047   $4.00




    
No. 55, 7V, .41A, Box of 10.

LM055   $10.00
    
No. 1819, 28V, .04A, Box of 10.

LM1819   $6.50
    
No. 455 Flasher, 6.5V, .5A, Box of 10.

LM455   $8.00
    
Lamp Socket Lamp Socket

Bayonet style lamp socket for general illumination lamps.
Designed to mate with the MP053 lamp bracket.

MP063   $3.00
    
Lamp Bracket Lamp Bracket

Custom lamp bracket for general illumination lamps.
Places the lamp the correct distance from the glass.

MP053   $4.00
    
Wireless Remote Wireless Remote

Four channel wireless remote.
Control the sleep mode, chimes, general illumination, etc.

RC001   $99.00
    
Power Supply Power Supply

5V and 12V power supply.
For general illumination lamps and power for the wireless remote.

PS019   $40.00
    
Wedgehead Box Wedgehead Box

Wedgehead wood box, ready for painting (glass not included).
Designed to fit the Gottlieb glasses that were originally in wedgehead machines.
Plenty of room inside for all the necessary electronics.
Glass slides up to access the interior compartment.

WD004   $200.00
    
Oak Box Oak Box

Oak box (complete pinball clock shown).
Custom made (2 to 4 weeks lead time) to fit the glass of your choice, including staining and sealing.
Plenty of room inside for all the necessary electronics.
Glass slides up to access the interior compartment.

WD005   $200.00
    
Backplane Wedgehead Back Board

Plywood back board for use when converting an existing Gottlieb wedgehead to a pinball clock. 3/4" plywood, sanded smooth and sealed with urethane.

WD005   $45.00
    
Bracket Mounting Bracket

Two piece, heavy duty mounting bracket for hanging your clock on the wall safely.
Makes your clock easy to remove from the wall for maintenance or programming.

MP062   $19.00